|
Sealer Selection Guide
| |
ENHANCING SEALERS |
PENETRATING SEALERS |
| |
SB-1300 JOINT
STABILIZING SEALER |
SB-7000 CONCRETE
SEALER |
SB-600 WET LOOK
SEALER |
SB-5000 STAINBLOCKING
INVISIBLE SEALER |
SB-4000 WATER REPELLING
INVISIBLE SEALER |
| APPEARANCE: |
| Finish |
Matte |
Semi-gloss |
Wet look |
Invisible |
Invisible |
| SURFACE APPLICATION: |
| Concrete and clay pavers |
0 |
0 |
0 |
0 |
0 |
| Natural stone |
0 |
0 |
|
0 |
0 |
Decorative, stamped, colored
and poured concrete |
|
0 |
|
0 |
0 |
| Retaining walls |
|
|
|
0 |
0 |
| FUNCTION: |
| Bonds joint sand |
0 |
0 |
|
|
|
| Resists stains |
0 |
0 |
0 |
0 |
0 |
| Blocks stains |
|
|
|
0 |
|
| TECHNICAL DATA: |
| Can be recoated with* |
SB-1300,
SB-7000 |
SB-1300,
SB-7000 |
SB-600,
SB-1300,
SB-7000 |
SB-5000,
SB-1300,
SB-7000 |
SB-4000,
SB-1300,
SB-7000 |
| VOC (g/L) |
82 |
99 |
39 |
50 |
44 |
| Coverage (ft2 on pavers) |
100 - 150 |
150 - 400 |
100 - 200 |
100 - 200 |
100 - 200 |
*Recoating should not be carried out over sealer from another company.
ENHANCING SEALERS protect masonry applications while improving their appearance with a variety of finishes. These unique formulations allow large particles to stay near the surface, altering the appearance, while smaller particles enter the substrate to bond and protect. These products will not trap efflorescence and can be applied immediately after installation is complete.
PENETRATING SEALERS offer the highest level of stain protection while leaving the appearance of the surface unchanged. These formulations penetrate deep to fill voids and prevent water and staining from setting into the material. Like all Surebond products, these sealers will not trap efflorescence and can be applied immediately after installation is complete.
|
